Customer Gallery

Used mild steel flat bar, bent, drilled, notched and screwed to the side of my garden pond plus some garden wire to prevent the frequent heron fishing trips!

A pair of 1200mm wide planter boxes were made using planed red cedar for the panels, treated C16 timber for the base, and mild steel angle for the legs. The legs were drilled and spray painted black. The inside sides of the boxes were lined with heavy gauge polythene sheet whilst the base was lined with garden fabric to allow for drainage.

We needed a table that was strong enough to take the weight of our toddler grandson

Spring project to finish patio. Angle Iron was used to support the chimney and roof of the BBQ. Thanks Austen Knapman for getting everything right.

Use in fitness as a pull up bar

Great if you like beer.

Front seat conversion for classic VW Campers, useing 25mm era tube and 25mm box section.

Fixed steel plate across subframe. Wheel kit unavailable for this model. Improvised with Wolf Wheel Kit

Perfect for making plant supports as seen on bbc gardeners world. Used 3 metre lengths for delphiniums, so plenty in the ground to move up as the plant grows

A Viking style sword I'm making for a customer in the states, to be used in a TV series that will be featured on Amazon Prime!

Steel concrete wood

This was a 3m length of 150mm x 3mm mild steel bar which can be pegged into a perfect curve. Over time the steel will take on an attractive Corten steel look.

Used just 100mm x 3mm mild steel bar for this lawn edging. This has been in place for several months and has taken on an attractive Corten steel look.

Used 150mm x 3mm mild steel bar for border edges between sleepers in this terraced garden under construction. Over time the steel will take on an attractive Corten steel look.

A new dishwasher, 150mm wider than the last left the worktop end unsupported. This fabrication saved the need to rearrange all of the kitchen, replumbing the sink and outdoor tap.